Serial.Reset

From Xojo Documentation

Revision as of 19:09, 3 September 2020 by THill (talk | contribs) (Text replacement - "{{Deprecated|" to "{{DeprecatedItem|")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Method

Serial.Reset()

Supported for all project types and targets.

Resets the port's baud and byte format.

Notes

The serial port must be open for this method to function.

Changes to the serial device are queued so that you can modify multiple properties of it without them all taking effect immediately. For instance, you can set the baud, parity and stop bits as one operation instead of three. The same thing applies to the line state properties. Once you've made all your changes, you need to call .Reset on the serial device to reset the device to the new settings.

Example

Serial1.Reset